Tap a number to open that product family
Silicone Gaskets & Seals

Adhesive Silicone Foam Gasket

Peel-and-stick closed cell foam seals, die-cut to your drawing

From $0.35 pc ISO 9001 Certified Free Sample MOQ 200 pcs

Black closed cell silicone sponge gasket with a high-tack acrylic adhesive backing. Die-cut to your outline, inner opening and screw holes in one pass, it presses into place by hand and seals dust, water spray and hot air on enclosures, control cabinets and appliance panels — no glue gun, no clamps, no cure time, and it comes off again without scraping.

Key Features

  • Peel and press — no glue gun, no clamps, no curing time
  • Seals dust, water spray and air across a 0.2–1 mm gap
  • Closed cells: no water uptake, no wicking along the joint
  • Under 15 % compression set, so a re-opened cover still seals
  • Outline, inner opening and screw holes die-cut in one pass, ±0.2 mm
  • Acrylic adhesive grips powder coat, anodised aluminium and ABS
StructureClosed Cell Silicone Sponge
Density0.45–0.65 g/cm³
Thickness1–10 mm
Hardness20–35 Shore 00

Product Overview

An adhesive silicone foam gasket closes the 0.3–1 mm gap that nobody designs in — and that gap is where most enclosure leaks start: a pressed steel cover that springs between its fixings, a welded frame that pulls out of flat after powder coating, a cast housing with a parting line. Liquid sealant fills that gap, but it has to be applied, it cures, it gets on the threads, and when the cover comes off for service somebody has to scrape it out. A die-cut foam gasket does the same job in one motion — peel the liner, press it down, close the cover — and the foam thickness absorbs the gap instead of trying to bridge it with a bead.

The material choice is what makes the peel-and-stick version worth using. Silicone sponge holds its shape at 200 °C and stays soft at -60 °C, so the same gasket works on a heated chamber door and on an outdoor cabinet in winter. It is closed cell, which means it does not drink water and wick it along the joint, and its compression set stays under 15 % after 22 hours at 175 °C — open a cover ten times over a year and the gasket still stands proud of the flange. The acrylic adhesive is chosen to key into powder coat, anodised aluminium, stainless and ABS; on low-energy surfaces such as PP, PE or silicone itself it needs a primer, and we will say so rather than let the part fall off in the field.

Supplied die-cut: outer outline, inner opening, screw holes and slots all cut in a single pass to ±0.2 mm, in thicknesses from 1 to 10 mm, flat sheet or on a roll with a split liner for high-volume assembly. Size the thickness at roughly 1.5× the gap you have to close and let it run at 25–40 % compression — that is where the foam seals without bottoming out and stops being a spring. Send the drawing (DXF, STEP or a dimensioned PDF) and the surface it will be stuck to, and we will quote the thickness, the adhesive grade and the liner style together.

Technical Specifications

StructureClosed Cell Silicone Sponge
Density0.45–0.65 g/cm³
Thickness1–10 mm
Hardness20–35 Shore 00
Compression Set< 15 % (22 h @ 175 °C)
AdhesiveHigh-tack acrylic, 0.05 mm, release liner
Temperature-60 °C to +200 °C
Cut Tolerance±0.2 mm
Flame RatingUL 94 V-0 available
ColourBlack / Grey / Custom

Ordering & Compliance

Min. Order200 pcs
Lead Time7–15 days
PackagingRelease liner + PE bag + carton
CertificationISO 9001 · RoHS · REACH · UL 94 V-0 (optional)
SampleFree sample available (freight collect)
HS Code4016.93

Need other hardness, thickness or dimensions? Our engineering team custom-compounds to spec.

Request a Quote
ISO 9001 · RoHS · REACH · UL 94 V-0 (optional)

Typical Applications

SHINEKIM silicone is used by manufacturers worldwide across these industries:

E
ElectronicsPrecision moulded parts for devices.
G
GasketingDie-cut and moulded seals built to drawing.
S
SealingGaskets, cord and sponge for reliable, heat-resistant seals.
V
Vibration DampingCompressible sponge for isolation mounts.

Frequently Asked Questions

What surfaces will the adhesive actually stick to?
Powder-coated steel, anodised or mill-finish aluminium, stainless, galvanised sheet, ABS, PC and glass all bond well after a wipe with isopropanol. Low-energy plastics — PP, PE, PTFE — and cured silicone rubber will not hold a pressure-sensitive adhesive; those need a primer or a mechanical fixing. Tell us the substrate when you order and we will match the adhesive rather than ship a standard tape and hope.
Will the adhesive survive 200 °C?
The silicone sponge takes 200 °C continuously; the acrylic adhesive does not. Its working range is up to about 150 °C continuous with short excursions to 200 °C, which covers oven doors, heater housings and most appliance panels. For a joint that sits above 150 °C permanently, fix the gasket mechanically (screw or retainer) or specify a high-temperature acrylic — say the temperature and the duty cycle and we will quote accordingly.
How thick should the gasket be for my gap?
Aim for 1.5× the gap so the foam runs at 25–40 % compression. A 0.5 mm gap takes 1.5–2 mm foam; a 0.2 mm gap takes 1 mm. Thinner than 1 mm and the adhesive liner becomes hard to handle on a production line; much thicker than needed and the cover will not sit down flat, or the foam acts as a spring and the screws work loose.
Can the gasket be reused when the cover is opened?
The foam body usually survives several openings — that is what the low compression set buys you — but the adhesive is a one-shot bond. Once peeled, dust and stretched adhesive stop it sealing again, so plan the gasket as a service part and keep spares. Residual adhesive comes off powder coat and metal with isopropanol; on plastics test a corner first.
MOQ, lead time and samples?
Standard MOQ is 200 pcs per profile, 7–15 days lead time; volume pricing starts around 2,000 pcs. Free samples are available (freight collect) — send the drawing and we will cut 3–5 pieces in the thickness we recommend so you can trial-fit on the real cover before the tool is committed.
01Own Plant · ISO 9001Full control from compounding to vulcanisation, fully traceable.
02Made to DrawingHardness, colour, size and process all customisable.
03Free SamplesSamples and full technical datasheets on request.
0460+ CountriesReliable worldwide supply and after-sales support.

Related products