Tap a number to open that product family
Silicone Foam & Sponge

Heat Press Silicone Foam Sheet

Cushion pad for heat press and transfer printing

From $24 m² ISO 9001 Certified Free Sample MOQ 10 m²

Orange open cell silicone foam sheet used as the platen pad in heat presses, sublimation and transfer printing machines. It spreads pressure evenly across the platen, springs back after every cycle and holds its thickness at 200 °C.

Key Features

  • Even pressure across the full platen
  • Springs back after repeated press cycles
  • 200 °C continuous, no hardening or glazing
  • Non-marking surface, no dye transfer to fabric
  • Cut to any platen size — die-cut or CNC
StructureOpen Cell
Density0.25–0.40 g/cm³
Thickness3–12 mm
Sheet SizeUp to 1000×2000 mm

Product Overview

A heat press pad does one job: turn a small platen into an even surface. Foam that is too hard leaves a halo around the transfer, foam that is too soft collapses under the platen and lets the seam of a zipper or a thick hem print through. This orange open cell silicone foam sits in the middle of that range, so the pad conforms to the garment without losing its own thickness.

Open cell structure is what makes the recovery work. Air escapes through the cell walls on compression and is drawn back on release, so the pad returns to its original thickness instead of taking a permanent set. In practice that is the difference between a pad that lasts a few thousand cycles and one that goes flat in a month.

Supplied in 1000×2000 mm sheets from 3 to 12 mm, plain or with a pressure-sensitive adhesive backing for platens that need the pad held in place. We cut to your platen size — send the dimensions and we return a cut sheet drawing before production.

Technical Specifications

StructureOpen Cell
Density0.25–0.40 g/cm³
Thickness3–12 mm
Sheet SizeUp to 1000×2000 mm
Temperature-50°C to +200°C (peak 220°C)
Hardness25–40 Shore 00
ColourOrange / Custom
FinishPlain / PSA backed

Ordering & Compliance

Min. Order10 m²
Lead Time7–15 days
PackagingFlat in PE film + plywood crate
CertificationISO 9001 · RoHS
SampleFree sample available (freight collect)
HS Code4016.93

Need other hardness, thickness or dimensions? Our engineering team custom-compounds to spec.

Request a Quote
ISO 9001 · RoHS

Typical Applications

SHINEKIM silicone is used by manufacturers worldwide across these industries:

H
Heat Transfer PrintingPlaten pads that keep pressure even across the whole print area.
S
Sublimation PressPads for 180–200 °C sublimation cycles without glazing.
T
Textile FinishingCushioning for pressing, ironing and finishing tables.
E
Embossing & LaminationResilient pads that hold their thickness under repeated pressing.

Frequently Asked Questions

What thickness should I use for a heat press pad?
3–4 mm for thin garments and flat transfers where you want the shortest heat path; 6 mm for general T-shirt, hoodie and sublimation work; 10–12 mm for thick seams, zippers, buttons and multi-layer work, where the extra give is what stops the hardware from printing through.
Will the pad mark the fabric or transfer dye?
No. The foam is pigment-free and non-marking in normal transfer work. Keep a protective cover sheet between the pad and any solvent-based ink or plastisol residue; pigment sitting on the pad surface is what causes transfer between jobs, not the foam itself.
What temperature can it withstand?
200 °C continuous with a 220 °C short-term peak, which covers plastisol, sublimation (180–200 °C) and most DTF presses. Above 220 °C the cell walls start to harden and the pad stops recovering — if your process runs hotter, tell us and we will quote a different compound.
How long does the pad last, and when should it be replaced?
Cycle life depends on pressure, temperature and how much of the platen is covered. Replace it when the surface starts to glaze and feel slick, or when thickness at the centre has dropped by more than about 20% of the original — at that point pressure is no longer even and you will see it as pale edges on transfers.
Can you cut it to my platen size, and what is the MOQ?
Yes — die-cut or CNC to any size up to 1000×2000 mm, plain or PSA backed. Standard MOQ is 10 m², and a single trial sheet is possible so you can run it on your own press before ordering production volume. Lead time 7–15 days; free sample, freight collect.
01Own Plant · ISO 9001Full control from compounding to vulcanisation, fully traceable.
02Made to DrawingHardness, colour, size and process all customisable.
03Free SamplesSamples and full technical datasheets on request.
0460+ CountriesReliable worldwide supply and after-sales support.

Related products