01 The problem
The plant laminates everything from 6 mm façade panels to 4 × 2 m oversize units, and the bag has to be changed between formats. Their opaque grey bags made interlayer flow invisible: operators judged the cycle from the pressure gauge alone and only found short-flow defects after cooling.
Changeover itself was slow. The old bag used a clamped frame with 36 bolts, and two operators spent close to an hour per format change.
02 What we changed
We supplied transparent 3 mm bags built to each furnace bed, with the U-seal welded in a single pass so there is no corner joint. The frame interface was changed to a quick-release profile: the bag seats into a groove and a single lever locks it.
Because the bag is clear, operators now watch interlayer flow directly and can extend the hold time only when they actually see it, instead of running a conservative fixed recipe.
| Material | Optical-grade transparent silicone |
|---|---|
| Thickness | 3.0 mm |
| Edge | One-piece U-seal |
| Temperature | −60 to 250 °C |
03 The outcome
Changeover dropped from about 55 minutes with two operators to 20 minutes with one. Across 40 format changes a month, that recovered roughly 23 production hours.
Short-flow rejects fell sharply in the first quarter because the defect is now caught during the cycle rather than after cooling.
Send us the failure mode, operating temperature and cycle count — recommendation and samples within 48 hours.
Request a Quote